s36se series 17w single output dc/dc converter ds_s36se_07202012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 87% ? package with industry standard pinout ? package dimension: 29.4 x25.6 x10.2mm (1.16? x1.01? x0.40?) ? isolation voltage 1500vdc ? operating temperature range - 40c to +85c ? six-sided shield metal case ? lead free, rohs compliant ? over current protection ? short output protection ? 3 years product warranty the s36se series are miniature, isolated 17w dc/dc converters with 1500vdc isolation. the s36se family comes with a host of industry-standard features, such as over current protection, over voltage protection, and remote on/off. all models have an unt ra-wide 4:1 input voltage range (18v to 75v). with operating temperature of -40c to +85c, it is suitable for customers? critical applicat ions, such as process control and automation, transportation, data communication and telecom equipment, test equipment, medical device and everywhere where space on the pcb is critical. model list output current input current efficiency (typ.) input voltage (range) output voltage max. min. @max. load @no load load regulation maxcapacitive load @max. load model number vdc vdc ma ma ma(typ.) ma(typ.) mv uf % s36se3r305 3.3 5000 0 1300 20 10 1000 86.5 S36SE05003 5 3000 0 1100 15 10 1000 83.5 s36se12001 36 (18 ~ 75) 12 1300 0 1100 15 10 500 87 input characteristics item model min. typ. max. unit input surge voltage (100 msec) all models 100 vdc input turn-on voltage threshold all models 16 17 18 vdc input turn-off voltage threshold all models 15 16 17 vdc input under-voltage lockout hysteresis all models 0.5 1 1.5 vdc off-converter input current all models 5 ma reverse polarity input current all models --- --- 0.3 a input filter all models internal pi filter 3.3v 3.6 w 5v 3.6 w internal power dissipation 12v 3.0 w
ds_s36se_07202012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc output characteristics item conditions min. typ. max. unit output voltage accuracy --- 1.0 2.0 %vo output voltage balance dual output, balanced loads --- --- --- %vo line regulation vin=18v to 75v --- --- 10 mv load regulation io=0% to 100% 10 mv ripple & noise (20mhz) 3.3v, 1uf ceramic, 10uf tantalum --- 50 --- mv p-p ripple & noise (20mhz) 5v, 1uf ceramic, 10uf tantalum --- 50 --- mv p-p ripple & noise (20mhz) 12v, 1uf ceramic, 10uf tantalum --- 50 --- mv p-p total outupt voltage range over load, line and temperature --- --- 3 %vo output dc current-limit range output voltage 10% low 110 150 %iomax short output protection continuous, auto-recovery output over-voltage protection 115 150 %vo general characteristics item conditions min. typ. max. unit i/o isolation voltage (rated) --- --- 1500 vdc i/o isolation resistance 10 --- --- m ? i/o isolation capacitance --- 1000 pf switching frequency 450 khz mtbf (calculated) io=80%iomax, ta=25 ,300lfm ----- 5m ----- hours recommend external input fuse all models 2000ma slow-blow type environmental specifications parameter conditions min. max. unit operating temperature range (with derating) ambient -40 +85 case temperature --- +105 storage temperature range -50 +125 humidity (non condensing) --- 95 % rel. h cooling free-air convection lead temperature (1.5mm from case for 10sec.) --- 260 power derating curve 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% -40-30-20-10 0 102030405060708090100110 ambient temperature ( j ) output power(%) natural convection s36se3r305 (encapsulation) output power vs. ambient temperature at natural convection notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage and rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20mhz. 3 all dc/dc converters should be externally fused at the front end for protection. 4 specifications are subject to change without notice. p2
ds_s36se_07202012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc mechanical drawing mechanical dimensions pin connections pin function 1 +vin 2 -vin 3 on/off 4 -vout 5 trim 6 +vout ? all dimensions in mm (inches) ? tolerance: x.x0.5 (x.xx0.02) x.xx0.25 ( x.xxx0.010) ? pins diameter : 0.10(0.004) physical outline case size : 29.4x25.6x10.2mm (1.16x1.01x0.40 inches) case material : al alloy; finish: anodize black baseplate material no conductive fr-4 pin material copper with matte tin plating and nickel under plating weight : 18.0grams part numbering system s 36 s e 3r3 05 n r f g form factor input voltage number of output product series output voltage output current on/off logic pin length option code 3r3 - 3.3v 05 - 5a n - negative k - 0.110? f - rohs 6/6 050 - 5v 03 - 3a p - positive n - 0.146? (lead free) 120 - 12v 01 ? 1a r - 0.171? space - rohs5/6 d - 0.24? s - 36 - 18~75v s - single e - s - 0.189? g - with metal case warranty delta offers a three (3) years limited warranty.complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice. p3
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: delta: ? S36SE05003pdfg? s36se3r305pdfg? s36se12001pdfg
|
